Mubychem Limited of USA is a pioneer manufacturers suppliers exporters & importers of chemicals including Hydraulic fracturing stimulation & oil well production chemicals, Pharmaceutical excipients, Fragrance & flavor chemicals. Muby Chem Ltd has several manufacturing facilities and toll manufacturers across the globe. We have offices warehouses and representatives in Houston & Midland Texas and Chicago Illinois USA.
Our suppliers have accreditations like FDA - GMP approval, ISO-9001:2008, ISO-22000:2005 HACCP, Kosher & Halal Certification. We offer Commercial Pure Pharmacopoeia ACS AR Analytical Reagent & Food Grade of Chemicals and do Toll Manufacturing for oil well drilling fracking fracturing and others.

Home ----- Contact Muby Chem Ltd.

Chemical Exporter Importer Supplier Jumbo Gag Packing, Bulk Powder Packing Export Cargo Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Secure HDPE Drum Packing Bulk Liquid Transport Palletized Drums By Air Express Delivery

Sodium Acetate Pure BP USP ACS FCC Food grade Manufacturers

Sodium Acetate Technical & Sodium Acetate Pure Grade
MSDS of Sodium Acetate Anhydrous Manufacturers
MSDS of Sodium Acetate Trihydrate BP USP FCC Food Grade ACS GR AR Analytical Reagent Manufacturers

Sodium Acetate
Anhydrous Trihydrate
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Sodium Acetate Anhydrous Sodium Acetate Trihydrate Crystals

Sodium Acetate USP Specifications

C2H3NaO2·3H2O 136.08

Assay—  Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Labeling— Label it to indicate whether it is the trihydrate or is anhydrous. Where Sodium Acetate is intended for use in hem dialysis, it is so labeled.
Identification— A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying— Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter— Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride— A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate— A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium— To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium— Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum
: (where it is labeled as intended for use in hem dialysis)— the limit is 0.2΅ =g per g.
Heavy metals—the limit is 0.001%.
Organic volatile impurities: meets the requirements.


Sodium Acetate Trihydrate BP Specifications

C2H3NaO2,3H2O
Action and use
Used in solutions for dialysis; excipient.

DEFINITION
Sodium ethanoate trihydrate.
Content
99.0 per cent to 101.0 per cent (dried substance).

CHARACTERS
Appearance
Colourless crystals.
Solubility
Very soluble in water, soluble in ethanol (96 per cent).

IDENTIFICATION
A. 1 ml of solution S (see Tests) gives reaction (b) of acetates.
B. 1 ml of solution S gives reaction (a) of sodium.
C. Loss on drying (As shown in the Relevant Test).

TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
pH
7.5 to 9.0.
Dilute 5 ml of solution S to 10 ml with carbon dioxide-free water.
Reducing substances
Dissolve 5.0 g in 50 ml of water, then add 5 ml of dilute sulphuric acid and 0.5 ml of 0.002 M potassium permanganate. The pink colour persists for at least 1 h. Prepare a blank in the same manner but without the substance to be examined.
Chlorides
Maximum 200 ppm.
Sulphates
Maximum 200 ppm.
Aluminium
Maximum 0.2 ppm, if intended for use in the manufacture of dialysis solutions.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium and magnesium
Maximum 50 ppm, calculated as Ca.
Heavy metals
Maximum 10 ppm.
Iron
Maximum 10 ppm, determined on 10 ml of solution S.
Loss on drying
39.0 per cent to 40.5 per cent, determined on 1.000 g by drying in an oven at 130C.


Sodium Acetate FCC US Food Chemical Codex

C2H3NaO2 Formula wt, anhydrous 82.03
C2H3NaO2·3H2O Formula wt, trihydrate 136.08

DESCRIPTION
Sodium Acetate occurs as colorless, transparent crystals or as a granular, crystalline or white powder. The anhydrous form is hygroscopic; the trihydrate effloresces in warm, dry air. One gram of the anhydrous form dissolves in about 2 mL of water; 1 g of the trihydrate dissolves in about 0.8 mL of water and in about 19 mL of alcohol.
Function: Buffer.

REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Sodium and for Acetate.
Assay: Not less than 99.0% and not more than 101.0% of C2H3NaO2 after drying.
Alkalinity Anhydrous: Not more than 0.2%; Trihydrate: Not more than 0.05%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Anhydrous: Not more than 1.0%; Trihydrate: Between 36.0% and 41.0%.
Potassium Compounds: Passes test.


Sodium Acetate ACS specifications

American Chemical Society Reagent Grade
Sodium Acetate Anhydrous
CH3COONa
Formula Wt 82.03
CAS Number 127-09-3

REQUIREMENTS
Assay: 99.0% C2H3O2Na
pH of a 5% solution: 7.0-9.2 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on drying at 120C: 1.0%
Chloride (Cl): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%


Sodium Acetate Trihydrate ACS specifications

American Chemical Society Reagent Grade
NaC2H3O2 . 3H2O
Formula Wt 136.08
CAS Number 6131-90-4

REQUIREMENTS
Assay: 99.0-101% NaC2H3O2 . 3H2O
pH of a 5% solution: 7.5-9.2 at 25C
Substances reducing permanganate: Passes test

MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Potassium (K): 0.005%

Sodium acetate BP Sodium Acetate USP IP ACS AR Analytical Reagent FCC Food grade manufacturers at:

Muby Chem Ltd.
Toll manufacturing & Warehouse at Houston Beasley & Midland, Texas, USA
USA, Canada, Mexico Customers may e-mail: usa@mubygroup.com
Call 1-844-682-9243

Europe Africa Asia India Mumbai e-mail: info@mubygroup.com
Call +91-22-23774610

Mubychem Ltd. Manufacturers Suppliers USA

Exporters Importers between USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
 26 June, 2015. Copyright and Usual Disclaimer is Applicable.

Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals

Ammonium Chloride

Benzyl Alcohol

Boric Acid

Borax; Sodium Borate

Calcium Chloride

Calcium Hydroxide

Calcium Oxide

Calcium Sulfate

Calcium Phosphate

Calcium Saccharate

Gentian Violet

Magnesium Chloride

Magnesium Sulfate

Manganese Chloride

Manganese Sulfate

Methylene Blue

Maleic Acid

Potassium Chloride

Potassium Phosphate

Sodium Acetate

Sodium Bicarbonate

Sodium Metabisulfite

Sodium Phosphate

Sodium Hydroxide Pellets

Sodium Propionate

Sodium Thiosulfate

Zinc Chloride

Zinc Sulfate

Chemical Products offered ex-stock. Any quantity. Container loads to pallets or packs
Other Ex-stock Chemicals Offered

Ammonium Chloride with/without anti caking agent Crystals & Granules
Ammonium Persulfate oxidizing gel breaker
Barium Chloride
Calcium Nitrite Crystals & 30% Solution Calcium Nitrate
Ceric Ammonium Nitrate
Chromic Chloride
Copper Chloride
Magnesium Chloride Anhydrous & Hexahydrate FCC USP
Magnesium Sulfate Anhydrous & Heptahydrate
Phthalic Acid
Phthalic Anhydride
Polycarboxylate Super plasticizer, Water Reducer Concrete Strengthener
Sodium Acetate Anhydrous & Trihydrate crystals & granular

:Sodium Diacetate
Sodium Formate
Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Crystals & Solution
Sodium Thiosulfate FCC Anhydrous & Pentahydrate Photographic
Sulfamic Acid
Zinc Chelate
Zinc Sulphate
Zinc Carbonate
Zinc Chloride Anhydrous & Liquid Solution 62.5%, 67% 70%
Zinc Ammonium Chloride Galvanizing Flux Powder Nuggets, & Liquid Solution-
Acid Inhibitor cum Fume Suppressant & Flux Enhancer
and more

Sodium Acetate Manufacturers  Sodium Diacetate Manufacturers

Sodium Acetate Trihydrate Anhydrous Ip BP USP ACS AR Analytical Reagent FCC Food grade Manufacturers Sodium Acetate Trihydrate Crystals IP BP USP ACS AR Analytical Reagent FCC Food grade Manufacturers Manufacturers

If you feed a dog with your hand, it will never bite you. That is the principal difference between a dog and a man.